ps vita joystick replacement joystick cap tutorial

There is a metal cover on the outside of the ps vita joystick, be careful of the cable underneath (the cable is actually very strong), open the fixed buckle around the metal cover, and remove the metal cover. If this is a bit difficult, you can use your nails or tweezers to apply pressure. Don’t worry about getting it out of shape, just pinch it back in time.

After removing the metal cover, you can see 4 springs. Take care not to lose the springs when you remove them.

After removing the spring, hold the rocker in your left hand, lift it up from the screw hole with your right hand, remove the black cover, and then take out the copper sheet

After taking out the copper piece, you can see the linkage device below. A white one is black underneath, and the mushroom-head buckle is stuck on the white part. This white part is tight. Use tweezers or other tools to remove the white part. Parts, the mushroom head can be removed after removing the white part. At this time, we will replace the mushroom head with a new one and then install the white part.

It should be noted that this white part is also divided into positive and negative. There is a raised side facing up. If it is installed upside down, it will be upside down when playing games. Don’t ask me how I know it, it’s all tears. what!

After replacing the new rocker cap, start to restore the rocker… Put back the copper plate, put back the black cover, put back 4 springs, fix the rocker cable on the black dots, and then pinch the metal cover back to the original Look, put it back again. Try to make it tighter (the metal cover must be tightly locked. If it is not tightly, it will drift slightly. Just disassemble it and squeeze it tightly again).

After the joystick is installed, we can reinstall the above steps backwards. The right joystick is the same as the left joystick. You can change the right joystick by referring to the left joystick.

board controller game joystick pcb ps4 ps5 parts ps5 ports psvita water xbox xboxones xbox one slim xbox parts xbox series x parts